BUY NOW, PAY LATER WITH AFTERPAY OR SEZZLE

Wine Shaped Glass Cutting Board

Wine Shaped Glass Cutting Board

Regular price
$8.50
Sale price
$7.50

4.5x12.5

Supplies needed:
- sublimation substrate (cutting board )
- sublimation transfer
- teflon or scratch paper
- heat tape
- Nomex pad or soft paper towel

Heat press settings:
- temperature - 400 degrees F
- dwell time - 3 minutes for all sizes
- pressure - medium


Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the heat press brand and model ink and paper
and atmospheric conditions.

2nd Note: Print your transfer "right-reading" not mirrored. The transfer is
going onto the backside of the substrate.

3rd Note: The Nomex pad or layers of soft paper towel helps to distribute the
pressure evenly throughout the substrate.


Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. Nomex pad or 4-5 layers of soft paper towel
3. transfer
4. substrate
5. teflon sheet or scratch paper

Steps:
1. Position the substrate onto the transfer; use heat tape to adhere the
cutting board to the transfer.
2. Place the transfer and substrate in the press onto the paper towel
(substrate on top of transfer).
3. Place the teflon sheet or scratch paper over the substrate and transfer.
4. Press the items using the settings listed above.
5. Remove the transfer from the substrate and items from the press
immediately. Use heat resistant gloves if necessary - the items will be very
hot.

4.5x12.5

Supplies needed:
- sublimation substrate (cutting board )
- sublimation transfer
- teflon or scratch paper
- heat tape
- Nomex pad or soft paper towel

Heat press settings:
- temperature - 400 degrees F
- dwell time - 3 minutes for all sizes
- pressure - medium


Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the heat press brand and model ink and paper
and atmospheric conditions.

2nd Note: Print your transfer "right-reading" not mirrored. The transfer is
going onto the backside of the substrate.

3rd Note: The Nomex pad or layers of soft paper towel helps to distribute the
pressure evenly throughout the substrate.


Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. Nomex pad or 4-5 layers of soft paper towel
3. transfer
4. substrate
5. teflon sheet or scratch paper

Steps:
1. Position the substrate onto the transfer; use heat tape to adhere the
cutting board to the transfer.
2. Place the transfer and substrate in the press onto the paper towel
(substrate on top of transfer).
3. Place the teflon sheet or scratch paper over the substrate and transfer.
4. Press the items using the settings listed above.
5. Remove the transfer from the substrate and items from the press
immediately. Use heat resistant gloves if necessary - the items will be very
hot.

Click to edit the product in Ali Orders.
Note: only show for shop owner